Видео

What kind of barrel is the 10/22?

I'm really glad you made this video about the bolt shims. It was very helpful in making a decision. Thank You. Keep the videos coming. Thank you for your service from an Army Vet to a Marine Vet..

What scope rings did you use to get on that 11 mm dovetail on the 550-1?

3 inch is the best revolver barrel length...imo

I was shopping for a mountain gun in 45. I ended up with a 25-7 5 inch barrel and unfluted cylinder. The price was half of the mountain gun and the 25-7 is a bit rare. 2000 made I think. Also a bit heavier than the MG. Still very happy with purchase. Very accurate.

Another PROUD MARINE here !!!! loved watching this great family fun !

Looking good!

🎉 awesome! Fun for the family!

HEY JARHEAD ! Check your e-mail!!!!!!!!!

Ok I have a stupid question, can you tell us about your shooting bench?

So its not a true ported barrel but instead a compensator...interesting...

Great challenge. Thank you.

Hard to beat a 52!

Awesome!

Come right .1 mil, maybe .2 mil and then no excuses. For the front rest, I'm not into benchrest, but the purpose of the front rest is to hold the rifle steady, right? If you're fine tuning elevation or windage with the rest, I think the bubble level is a guide rather than "law" unless you're actually shooting a benchrest rifle. I don't know of any 10/22 that is a benchrest rifle. Great shooting and I love the content. A bad day at the range is better than a good day at work.

We had fun today with the Captain America Challenge, Shooting our CZ 457's Top Score SK Rifle Match = 73 with a broken bipod. Range Fans after watching the video to the end scoring rules, I need to edit my score to a 78

First I am going to have to look up what a zero stop is and second what range are you shooting, but third and most important have a great Independence Day. Tomorrow I will get off my couch and go out and shoot

What's wrong with 50 meters 😅 loving this new challenge

I like your videos, keep going pro 👍🏼

You pulled all the excuses on this one lol Nice Brother hope you and the family had a great Independence day MURICA!!!!

Scope problem may be the zero stop limiting travel. Try removing it. A 20 MOA base will only make the problem worse. Just try using the rear foot adjustment. Left / right level is more critical. Trust me… I know that you grew up holding the rifle tight in your shoulder, cheek on stock, and squeezing the bag. Benchrest shooting is a different animal - you need to let the rest do all the work for and isolate yourself from the rifle. If you have a very light (3 oz) trigger, that’s all that you should be touching. If not, pinch the trigger back with your thumb on the rear of the trigger guard - just two fingers in touch with the rifle. Get some rubber feet for the rest when using it on a hard surface. Caldwell sells some or you can make them stacking and epoxying washers and gluing inner tube rubber to the bottom. You don’t want the rest wandering around the bench. If it still moves, clamp a piece of wood across the bench in front of the rest. I use a piece of rubber horse stall pad under my rests - buy the pad at Tractor supply. Try using the fore end stop on your rest - it provides consistent return to battery. When setting up the rifle on the bench, pound the stock down into the rear bag ears. This compresses the bag and provides 12:36 consistent height support. Put a used dryer sheet on the bag for consistent recoil friction. You may notice my consistent use of the word “consistent”; that is the key to benchrest precision. Rests are ideally used with rifles that have a flat 3” wide fore end. This allows the rifle to set stable in the rest without you supporting. Most of the rifles you shoot have narrow, rounded stock fore ends that are not compatible with rifle isolation. Stocks can be modified by planning the fore end flat and attaching a flat 1/4” thick by 3” wide metal plate - steel is best because it adds weight. Brownells sells a Sinclair 3” four end adapter. Attach a pic rail to the sling swivel and the adapter to the rail if you don’t want to modify the stock. You can move this contraption from rifle to rifle.

My CZ did not like it. It likes SK rifle match.

Great Video. Love the content and your energy is awesome. Thanks for making them and sharing.

I am no scope pro my friend, wish I could help you out 😢 Only thing i am a pro at is not winning these dang challenges 😒 😂😅 Happy Independence Day my friend! 🇺🇸 🇺🇲 🙏 🇺🇸 🇺🇲 MERICA!!! 😊

If you need him help getting a 20 or 30 MOA rail let me know. Make sure you’re not against the zero stop.

👍Howdy from Kansas, Semper-Fidelis

So what distance are you shooting?

GOD BLESS YOU AND THE FAMILY.... GR8 VIDEO THNX HAPPY 4TH OF JULY AMERICA #GODWINS

Once front rest is level. Leave it there a up , down wheel for resond and left right adjustment for a resond. Lol why any one with use the feet I don't understand.

Elevation adjustment with the mariner wheel. Get her setup with your rifle as you would shoot. Take the rifle out and use your paws on the top of the rest where your rifle would nest and see if you can move the top of the rest. Any movement should answer your question!!!!!!!!

It sounds like there is something wrong with your scope if it is bottomed out at 50 yards. Or it isn't mounted right if it is bottomed out at 50 yards.

Don't let people tell you how to operate your rest. You were doing it all right

What is your email address to sign up for the challenge’s? Nice shooting Marine. Happy fourth!

The original receipt couldn't have said it was bought in 1955, because they weren't for sale until 1959.

I don’t have the same rest as you but one similar. And I use the rear foot for fine adjustments for benchrest shooting. Now I don’t use it to move from top to bottom of the card I use the wheel for that. But a inch or so I haven’t seen where that does anything to point of impact. I’ve always wondered why you didn’t use it. Love your videos.

I tried the same scope on my 10/22, and you are correct. Without a 20 MOA rail, you're tapped out on the elevation. I was out this morning for the first time in about 2 months. Happy 4th!

Happy 4th to ya'll. Scope should not be bottomed out at only 50 yards. A friend had this similar problem, I forgot what he did to correct it but I think the problem was the scope internally. Ask Cyclops he's the scope master. Under Warranty? As far as moving the front mount if your pressed for time you can adjust it from rear leg but if no time issue, adjust it proper way.

love your chanel my man - good clean fun take my grandkids out shooting all the time

What yard line? LOL🎆🎇🧨 Still a good score and great group at the end. Thanks and Happy 4th of July!!

I always level my rest with the bottom feet. happy Fourth of July big guy,and are you shooting 50 yds 👍😀😀😀😀😀

Why do we have to engrave our name when the firearm already has a serial number? Why do we have to pay a group of people to do something we already have a right to do from our constitution

Great vid🤟❤👍 I bought Hawthorn 45 Super 255 gr hardcast Ammo that hits 1490fps and 1257 fpe on the chronograph. Insane....

You are the best in communicating! Pretty good shooter as well.😊

Happy Independence Day, thanks for the video!!

after seeing that it makes me think harder about a custom 10/22 for a new squirrel rifle thanks for the video

You didn’t have a fancy rest when you qualified in the Marines… that rest position is irrelevant if you’re the one in control of your weapon. 20 MOA mount .

Happy Independence Day Mr Elijah! Definitely add a 20 or 30 moa rail. Need it for long ranges anyway and it’ll get you off the end of the travel range. Extremes in travel are never good. I’ve got that same scope on a 6.5 creedmoor…good deal for the $ although 35-40x gets a little dark.

What distance? 😎

Happy Fourth of July!